BlackBerry Q10 USB charging problem repair.
The celways phone repair service blog is updated maximum now. Are you searching for ? "BlackBerry Q-10 USB Charging Jumper. Here is the solved helpful blog for this issue (BlackBerry Q-10 USB Charging Jumper) by ilink mobile repairing. Fault Description: Not charging, No charging response. Missing USB jack pin points. Need jumper ways diagram for BlackBerry Q-10 USB Charging section.
- The guide by Shahid Abbas explains how to repair the BlackBerry Q10 USB Charging Jumper.
- The issue is related to the USB connection not working, causing slow speeds and a faulty USB jack.
- The problem may arise from a broken or damaged USB jack pins, which need to be replaced with a new or working jack.
- The guide also provides a troubleshooting guide for the issue, ensuring that the user has a compatible charger and USB lead.
- The guide suggests cleaning USB jack pins and connecting the charger to see if the problem is resolved. If the issue persists, the USB jack, charger, charging bank, or data cable need to be replaced.
- The guide also suggests repainting the charging controller section to solve the issue.
- If the main chip is not working, the guide advises against heating the main chip with hot air.
- The guide is for learning purposes only and is not responsible for any harming issues.
How to repair BlackBerry Q-10 USB Charging Repair.
When this issue comes to any mobile phone. Users should not charge their mobile phone battery. The USB connection may have stopped working. Mobile phones may have a little bit short or hang on a logo. The user could be faced with very slow speeds on their mobile phone. Some time the faulted USB jack can cause the mobile phone battery to drain fast.
How to repair BlackBerry Q-10 USB jack.
From the open mouth of USB jack. The water will get inside and create carbon on the USB jack pins. The carbon can infect USB jack pin points and mobile phones have been faulted. Some time the old USB jack should be missing from the motherboard connections. In this case you can replace the USB jack and make a direct jumper on the missing pins by the diagram. This issue may have come from the faulted sim controller section. In this case, you need to fix it by troubleshooting hardware repair. The problem will come from a broken / damaged USB jack pins. You need to replace it first with another working or new jack.
Troubleshooting guide for BlackBerry Q-10 USB Charging issue.
Make sure ! you have a conform working charger, USB lead. The computer or laptop USB slot can help identify the real issue. Some time the USB charging is working fine, but the USB data cable has been faulted. Basically, There are two type of used the USB jack. One for the charging and the second for the data traveling. The red and black line jumper on a USB jack can help in fixing the charging issue.
The other lines are used as the USB to computer, laptop data connectivity. If you have the knowledge to manage repairing a USB jack, pin out points with a jumper. You can use any type of jack into any brand of mobile phone. If your problem will be solved from the given guide. That sound is cool. But for the bad luck to solve this issue. No problem, let us fix it with steps now.
- Try to clean USB jack pins. You can clean these pins with a needle pin.
- Now try to connect charger and see the results on display.
- If you have faced a struggle charging. You need to replace the USB jack, charger, charging bank or data cable. It depends on the condition of your mobile phone accessories.
- Try to solve USB jack not responding by direct jumper on missing pins.
- You need to test before any jumper for the missing pins by checking the meter. Keep in mind, any type of jumper can work for the missing pins only.
If the USB jack and its connections are working well. The next section that can involve this error. The charging controller section is very important. In this section; Charging IC or resistance may have broken / damaged. Try to solve it by repainting the faulted charging current filter chip. The next thing that you can test is for the USB jack not working. The USB controller IC and main chip of motherboard.
Author comments:
If you have a plan to heat the main chip with hot air. Ask your customer for a dead approval. Try it at your own risk. Mobile phone should be permanently died. This guide can help only for the BlackBerry Q-10 USB Charging Jumper problem. Do the same as guide every step of mobile repairing. Problem solution is updated for learning purposes only. We are not responsible for any harming issue. The phone tolls mobile phone repair blog is updated to its maximum content quality. Please subscribe us and share it on the social media web sites. The login details are required and the all process is free at celways blogspot.com. Before working with our celways phone repair tips, tircks and other diagoneses. Please read our privacy policy and other leagel documents.
0 Comments