Nokia 107 display blank problem repair tested diagram

How-to, Nokia 107 display blank problem repair.

You can fix it from here. Dull showcase, Show lights jumper way. Arrangement celways versatile fixing blog. The picture graph and portable fix tips, stunts are accessible on this blog. With article and investigating guide answer for Nokia 107 presentation clear.

• The Nokia 107 display blank problem is caused by a broken or missing LCD connection from the motherboard.

• The display is not functioning properly, and the phone only shows a white screen.

• The main cause of this issue is a programming issue and an equipment issue.

• To fix this issue, replace the LCD with the latest firmware, remove the LCD from the motherboard, and check the power supply.

• If the LCD connection plate is missing, make jumpers as shown in the picture graph.

• If all jumpers are made, follow the missing point and make a jumper on the missing point.

• Some jumpers are directly connected to the ground of the PCB.

Issue: Clear presentation, Lights as it were. Show just, Mixed show. Dead handset.

Arrangement: Change LCD, Make jumpers, Full blaze with most recent programming.

At the point when show is broken or missing connections with motherboard, this model of Nokia cell is quit working and didn't on impeccably, some time set is power on yet no lights, lights alright, however no presentation, just white screen, clear presentation is the significant reason for this issue. To fix this issue in this phone model there are many reasons and ways, yet for best investigating this issue we really want a some essential information about this theme.

In old or unintentionally falling by hand in water or out and about, the cell has gone dead and you are so miserable for your phone. Relax, your PDA will be back in the future in functioning admirably. However, on the off chance that your PDA PCB is harmed, broken in parts, miserable news for you, kindly get another phone. To fix some showcase issues, if it's not too much trouble, read the investigating guide here.

Effective method to fix Nokia 107 Telephone show clear issue.

LCD is broken or missing from motherboard of PDA and PDA is totally dead or just 1/2 focuses show when power supply is associated with battery terminal. This implies two sorts of deficiencies are running in this mobile phone (1-Programming issue and 2-Equipment issue).

In the event that handset LCD strip Association and PCB associations are alright, attempt first full glimmer with most recent blaze documents your PDA. No karma to settle by programming, eliminate LCD from motherboard and check focuses with really look at meter, in the event that missing any mark of LCD association plate, kindly make jumper as picture graph underneath. Here are arrangement by arrangement investigating please.

Full blaze with most recent programming. Change LCD. Missing any association on PCB make jumper same as picture graph.

Try not to make all jumpers simply check and follow missing point just and make a jumper on missing point.

A few focuses are straightforwardly associated with ground; you can make these jumpers with ground of PCB anyplace.

Caution! While dealing with this stunt, assuming incidentally your handset might have dead or blamed, we are not liable for that; if it's not too much trouble, read our protection strategy. Before working with our celways phone repair tips, tircks and other diagoneses. Please read our privacy policy and other leagel documents.