Nokia 105 display problem repair tested diagram help

Welcome! At the best telephone fix blog celways. This issue accompanies water harmed and broken LCD strips/pins focuses. The issue will be addressed here by ilink Shahid. In this post you can find out about, How to make a jumper on missing pin point of LCD. It implies the LCD has been separated from the motherboard. Cell phone shouldn't turn on, it will kick the bucket.

How-to, Nokia 105 display problem repair.

• The guide by Shahid Abbas explains how to fix a Nokia 105 display issue.

• The issue is usually caused by water damage or broken LCD strips/pins.

• The main cause is missing connections on the mobile phone motherboard where the LCD is connected.

• The guide provides stepby-step instructions for resolving the issue.

• If the issue is not resolved, the LCD should be replaced. If the LCD is missing at least one pin, a jumper should be made from the diagram.

• The guide also advises changing the display lights or making jumpers for no display lights.

• The guide also advises not to remove the display with a heat gun.

• The guide is not liable for any damage or loss resulting from the repair.

This cell phone LCD missing reason is exceptionally normal and the versatile fixing investigating can fix it. This issue is equipment related. Issue: Clear showcase, No light, Show just, Broken joins, White presentation LCD. Arrangement: Change LCD, Make jumper.

Step by step instructions to, Nokia 105 showcase issue fix.

While show misunderstanding or flawed, for instance, harmed, broken, missing connections on cell motherboard or No presentation light, white presentation, this mean your wireless need a some investigating. You can fix this issue by following the investigating guide. Some time this issue is made from broken LCD strip however the significant reason for this shortcoming is missing focuses on mobile phone motherboard where LCD is joined with it.

This shortcoming accompanies old or water harmed handsets. The primary justification for this shortcoming is shorted focuses on the LCD or overcurrent on this stage. Some way, in any condition you can fix this by perusing Investigating guide.

Helpful__ Nokia 105 presentation issue arrangement.

Nokia 105 showcase way jumper arrangement. first change LCD in the event that issue not settled then before transform you can check LCD focuses by multi meter, In the event that missing at least one focuses, make just required jumper from picture displayed beneath chart cautiously with jumper wire.

1. Change Drove lights or make jumpers for no showcase lights.
2. Change LCD or make jumper cautiously with great quality jumper wire assuming that missing any point on mobile phone motherboard.
3. Handset might have stop reaction assuming that show is eliminated from circuit.
4. Try not to eliminate show with heat weapon.

Caution! During chipping away at this stunt, assuming coincidentally your handset might have dead or blamed, we are not liable for that; if it's not too much trouble, read our protection strategy. Before working with our celways phone repair tips, tircks and other diagoneses. Please read our privacy policy and other leagel documents.